Buy your own Pachislo Tokens here: See all our other games for sale, right now, at www.LyonsArcade.com! Music by www.BenSound.com! The Japanese parlors that feature the vertical pinball machines known as pachinko usually have a section devoted to slot, or pachislo machines, which bear a passing resemblance to Vegas-style slot machines. Yamasa is the third-leading supplier of pachislo machines, and in 2010 held an 8.8 percent share of all machines installed throughout Japan. Use Gambling machine High Quality Equipment Coin HOPPER Slot Pachinko Token GD666-Hopper Pachinko game machine/Japan Original gambing game machine/Casino Game Machine US $980.00-$2990 / Set.

1. Japanese Slot Machine Hopper Games
2. Japanese Slot Machine Hopper Rental
3. Japanese Slot Machine Hopper Racing
4. Japanese Slot Machine Hopper Machine

If you have a slot machine or you have bought one old used vintage slot machine and want to have some fixes to get it work then obviously you will think you need a machine technician. Many of you will even think of taking it to some repair station to get things done. But here in the guide you will find some of the repairs that you yourself can do with your slot machine and you need not need to join machine technical repair training school.

Like any other machines Slot machines too are a blend of electronic and mechanical components, that wear with age and require routine repairs. Before you begin to repair yourself do note that every slot machine that you have purchased whether old or new comes with installation and user guide manual. You need to read that many a times until you are familiar with each components and parts of the slot machine and understand thoroughly as how the slot machine works.

In your guide to repair slot machines you will find some common repairs that can be carried out by you, some videos to watch as well. If your slot machine has some complex issue then obviously you require a qualified technician.

Changing the Top Florescent Light

The top florescent light bulb is easily changed by following these simple procedures. The replacement bulb is an F15T8/CW 18″ 15 Watt bulb which is available at most hardware and department stores or may be purchased online at Ebay or Amazon or realslotmachinesforsale under the category ‘parts of slot machine’.

• Open the main slot machine door and ensure the door is fully open. Turn off the power to the slot machine. The power switch can be found with the main door open about midway down on the right side just inside the machine.
• If the machine is equipped with a top ticket printer, you must pull the bottom of the printer out far enough to see where the ticket paper is located, and note the area large enough to place a couple of your left fingers under.

• Remove the top metal trim strip which is a cover plate to the right of the ticket printer and/or is located along the bottom of the top glass. There are a couple of clips on the back of the metal trim strip that fit into notches on metal bracket which holds the top glass. The metal trim strip should be lifted upwards and outwards to remove.
• Once the metal trim strip is removed, the next step is to remove the top glass. Note that some top metal trim strips have a slot in the top that holds the top glass and they must be removed very carefully as to not damage or drop the top glass.

• You can now see the top glass is held in place by usually two or three clips that rise above the metal bracket behind the top metal trim strip. Now slowly lift up on the top glass from both bottom edges until the top glass until it is high enough to gently pull it forward and allowing it to slide down and away from the top track and clips holding it in place.
• Once the top glass has been removed, put it somewhere where it will not get knocked over or broken. You will see the florescent bulb in the middle of the top box area of the machine. Care should be taken removing the bulb as it may be very hot. Remove the old bulb by twisting the florescent tube about a quarter to half turn allowing the two prongs on the bulb to slide out of the fixture on both sides of the bulb.

• Remove and discard the old bulb. To install the new bulb, align the two prongs on each side of the florescent tube with the slits on each fixture in the top box of the slot machine. Twist the bulb into place normally using about a quarter to half of a turn. If the bulb is not secure or aligned, repeat the procedure.
• If your slot machine is an IGT S Plus machine, it is equipped with a florescent bulb starter. Then you can replace the starter when replacing the florescent light bulb. The starter is an FS-U Universal Starter. They are available at most hardware and department stores or may be ordered online too. The starter for the top florescent bulb on an IGT S Plus machine is located directly behind the florescent bulb fixture on the left side of the slot machine in the top box area.
• It is replaced by twisting about a quarter to half a turn as it is held in place with a bayonet type mount. Remove the old starter and discard. Replace with a new FS-U Universal Starter by aligning the two pins on the bottom of the starter with the notches in the starter receptacle, pushing it up into the starter socket, and then twisting it a quarter to half a turn into place.
• Prior to re-installing the top glass, turn the power switch on the right inside of the machine on to verify the bulb works properly. If it does not, turn the power off and check that the bulb is properly installed and secure. If replacing a starter, check that it is also properly installed and secure.
• After verifying the bulb is working, it is now time to replace the top glass. If your slot machine has a top ticket printer, ensure the ticket printer is still pulled out so you can place your fingers in the opening while replacing the top glass.
• Carefully and slowly lift up the top glass placing each hand under the bottom of the top glass. Slide it into the upper edge track on the top box of the slot machine carefully lifting it so it slides into the tracks while being able to push the top glass back far enough to clear the two or three raised clips on the metal bracket where the top glass holding track is located.
• Gently and slowly lower the top glass behind the clips so as to allow them to hold the glass in place. If properly secured, the top glass will not be able to slide down or out of its position. Keep a secure hold on the top glass until you are certain it is secured in the proper position.
• Replace the top metal trim strip by aligning the two or three hooks the back through the metal bracket that supports and holds the top glass. Once the hooks on the back are in place, gently push the top metal trim strip down and it should snap into place. If you have a slot machine with a top ticket printer, close it tight into position. Close the main slot machine door and you are ready to play.

Changing the Belly Glass Florescent Light

The belly glass florescent light bulb is easily changed by following these simple procedures. The replacement bulb is an F15T8/CW 18″ 15 Watt bulb which is available at most hardware and department stores or may be bought online as spare parts of slot machine.

• Open the main slot machine door. Turn off the power to the slot machine. The power switch can be found with the main door open about midway down on the right side just inside the machine.
• Facing the slot machine door, look on the right side of the door just around from bill acceptor area. You will see a knob sticking out that is approximately the size of the end of a regular pencil. This knob when pulled out releases the slot machine belly glass assembly (belly door) to fold down so the bulb can be accessed.

• There are a couple of very important thing to remember prior to pulling this knob to release the belly door. First try pulling gently on the knob. If it does not allow you to pull out and you have a lock installed directly above it, the lock must unlocked in order to allow the release knob to pull out. When pulling out the release knob, be ready for the belly door to fold down.
• Most of the time you must lightly pull on both sides of the belly door to get it to fold down, however always place your hand under it so it does not fall down too quickly causing the belly glass to break or crack.
• Once the belly door is in the down position, you will see the access to the florescent bulb bracket that is held in place by a small Phillips screw. Remove the screw and place it the coin tray so it will be handy when you need it after replacing the bulb.

• The long metal bracket that holds the florescent bulb must be slid slightly right or left so as to be able to lift it out of the belly door. Gently lift the metal bracket with florescent bulb out of the assembly far to be able to turn it over to replace the bulb. Be cautious as the bulb could still be hot!
• Grasp the metal bracket holding the florescent bulb and remove the old bulb by twisting the florescent tube about a quarter to half turn allowing the two prongs on the bulb to slide out of the fixture on both sides of the bulb.

• Remove and discard the old bulb.To install the new bulb, align the two prongs on each side of the florescent tube with the slits on each fixture that is on each side of the new bulb. Twist the bulb into place normally using about a quarter to half of a turn. If the bulb is not secure or aligned, repeat the procedure.
• Now turn the metal bracket that holds the newly installed bulb over and back into position in the belly glass assembly. Slid the bracket slightly right or left into position and replace the small screw which holds the metal bracket in place.
• If your slot machine is an IGT S Plus machine, it is equipped with a florescent bulb starter. So you need to replace the starter a well when replacing the florescent light bulb. The starter is an FS-U Universal Starter. They are available online and you can purchase one.
• The starter for the belly glass florescent bulb is located on the back of the main slot machine door on the lower right hand corner as you face the back of the door.

• It is replaced by twisting about a quarter to half a turn as it is held in place with a bayonet type mount. Remove the old starter and discard. Replace with a new FS-U Universal Starter by aligned the two notches on the bottom of the starter, pushing it into the starter socket, and then twisting it a quarter to half a turn into place.
• Prior to closing the belly glass door, turn the power switch on the right inside of the machine on to verify the bulb works properly. If it does not, turn the power off and check that the bulb is properly installed and secure. Also check to ensure the starter is properly installed and secured.
• Lift the belly glass assembly up and push it into place in the slot machine door. Ensure the belly glass door snaps into place and the knob on the side of the door is in its normal position. It is spring loaded so as to not allow the belly glass assembly to open unless it pulled. If the belly door appears to be in place, pull on both sides of the belly door to make sure it is locked and secure.
• If you unlocked the lock above the knob, re-lock it. Close the main slot machine door and you are ready to use your slot machine.

Changing the Push Button Bulbs

All of the slot machine’s push button lights such Play Max Credits, Spin Reels, Bet One Credit, etc. are easily replaced by following this simple procedure. The replacement bulbs are #161 on IGT S2000 machines and #555 on IGT S+ machines and may be purchased from online stores.

• Fully open the slot machine door. Look on the backside of the door. Each push button will extend down from the shelf on the door and will have a small wire bundle going to it. Identify which push button bulb needs to be replaced.
• Carefully pull down on the bottom of the push button area that is normally white and is where you will see wiring connected. Using your thumb and two fingers, pull straight down and the bottom portion of the push button should snap out.

• You will now be able to see the bulb in the top area of the lower push button assembly. Use caution as the bulb may be very hot. Pull the wedge bulb out and discard it. Notice the slot in which the bulb located.
• Place a new bulb in the slot noting the direction of slot ensuring the new wedge bulb is inserted so as to line up in the slot. Push the new bulb into place.

• Replace the bottom of the push button assembly by inserting it into the top portion of the push button assembly. The bottom portion will snap into position. Ensure that none of the wire connections have been accidentally knocked loose on the bottom of the push button. Note the push button light will not illuminate until the slot machine door is closed. Close the main slot machine door and you are ready to play.

Changing the Small Panel Lights

The small panel lights that illuminate the denomination amount and other areas behind the glass are easily changed. For denomination amount lights on the IGT S2000, a #73 bulb is needed and a #86 bulb is needed on the IGT S+ slot machines. They may be bought online from slot machine selling sites.

Here it is described as how to change the lights behind denomination amounts such as .25 Cents. Other small panel light bulbs are changed in the same manner.

• Fully open the slot machine door. Look on the backside of the door. Note the location where the denomination amount would be located near the center just below the slot machine’s center glass. The area will appear to be flat with a small bulb holder projecting out that is slightly larger in diameter than a regular pencil and is flat on two or four sides.

• This bulb holder is removed by simply twisting it a quarter to half a turn and then gently pulling it out of its socket. It is held in place by somewhat of a bayonet type mount.
• Once the bulb holder is removed, pull the wedge bulb out of the socket and discard the old bulb. Caution should be taken as the old bulb may be very hot. Replace the bulb by firmly inserting a new bulb into the socket of the bulb holder being careful to align the wedge bulb correctly into the slot.
• Take the bulb holder and look for two notches on each side of the opening where the bulb holder is inserted. Note there are two notches on the bulb holder. Align the notches inserting the bulb holder into the panel.
• Gently twist the bulb holder about a quarter to half a turn to lock it into place. Verify the bulb is illuminating, and if not repeat the procedure using a different new bulb. Now close the main slot machine door and ready to use.

Cleaning Your Slot Machine

This is common thing and all you need is usually nothing more than a damp cloth to clean the exterior cabinet of your slot machine. Never use any abrasive or ammonia based cleaners on the cabinet of the machine.

The slot machine top, center and belly glasses may all be cleaned on the outside by using a window cleaner. However if you own a slot machine with a frosted exterior glass or one that has any exterior decorated markings such as stars, a window cleaner should not be used as the cleaner may damage the exterior images. Care should be taken cleaning interior glass as a cleaner and cloth may damage labels or markings.

The inside of the slot machine should not require cleaning other than occasionally removing dust. This can normally be done with a damp clean cloth, however ensure the power switch has been turned off prior to cleaning.

When wiping dust inside your machine, be careful not to loosen any wires or connections. Do not use a damp cloth on the face of your reel strips as the playing symbols on the reel strips could come off or become torn. Also be very careful not to touch the back side of your reel strips with a damp cloth especially if the back sides of the reel strips are black. This can cause damage to this type reel strip.

When your Slot Machine Doesn’t Power On

When you get a slot machine and wish to locate or set up at your place, determine the household 120V AC outlet you are planning to use has power. Keep in mind some outlets are controlled on and off by a wall switch.

• With the slot machine unplugged from the outlet and surge protector, open the slot machine main door. Remove the coin tray by lifting up and pulling out the tray. Simply pull it out and down to remove the tray.

• The hopper is on the bottom floor of the machine and slides out on two base rails along two metal guides. Slide the hopper out slowly by grasping the handle with your left hand and supporting the hopper with your right hand. Do not use the black hopper bowl to pull the hopper out of the slot machine.
• On the lower right corner of the slot machine you should see the black power cord coming into the machine. The power cord plugs into the Power Distribution Unit which is located on the back wall of the slot machine.
• Verify the power cord is firmly plugged into place into the right side of the Power Distribution Unit.

• Place the hopper back into the slot machine making sure it slides in easily and completely with the base rails on hopper guides on the bottom of the machine. The hopper plugs into a receptacle toward the back of the machine. It is designed to fit in easily without using excessive force.
• The coin tray can be easily put back into place by ensuring the alignment pins on the coin tray match up to the top alignment holes on the bottom side of the machine. The tray should be pushed down into place. Make sure the tray is even when pushed into place. If the coin tray is not aligned and even, remove the coin tray, and repeat the procedure.
• Verify the power cord is firmly plugged into a good surge protector. Plug the end of surge protector into the outlet you have verified is good, and make sure the on/off switch on the surge protector is turned on.
• Now turn the power switch on the inside right of the slot machine to the on position and verify the slot machine is powered on by lights illuminating.

Jackpot Payout Reset

When your slot machine just hit a 25,000 credit Jackpot it now needs to be reset to continue playing. Depending on the model slot machine you have and the amount of the payout will determine the best course of action.

If you have an IGT S+ Slot Machine and your win is under the maximum payout amount specified on the center glass of the machine, the hopper may run out of coins or tokens. This is normally displayed by Error Code 3300. In this case it usually a simple matter of taking the coins or tokens that have been paid out and putting them back in the hopper allowing it to fully pay out. However, if you won a large jackpot that is “hand pay out”, then follow the steps below.

• First open the main slot machine door. Locate the Jackpot Key which is normally kept inside the slot machine in a plastic envelope on the side of the cash box. If you do not find it inside the machine, often times the Jackpot Key will be strapped with the main slot machine door key. It is a small key as pictured below.
• Take the key in hand and locate the jackpot reset which is a keyhole located on the right side of the slot machine. It is normally about two-thirds up from the bottom of the machine.

• Insert the Jackpot Reset Key into the keyhole. Turn the key only one quarter turn to the right. This will reset the machine, and once you close the main slot machine door, you will be ready to resume play.
• Note that if you turn the Jackpot reset key multiple times you may place your slot machine into a test mode and will thus delay your ability to continue playing.

Some of the Error Codes you get on Slot Machine

Error Code 3300 (IGT S+ Machines)

Simply put Error Code 3300 is normally telling you your hopper is low on or completely out of coins or tokens.

Open the main slot machine door. Look into the hopper. If it is empty or has just a few coins or tokens, place about 500 coins or tokens back into the hopper. Close the main slot machine door. In a few moments you should hear the sound of the hopper’s motor turning and soon the remaining coin payout will begin.

Error Code 3100 (IGT S+ Machines)

Error Code 3100 (Extra Coin Out Tilt) normally signifies either a jammed/stuck coin or token in the coin-out chute on the hopper, or the hopper coin-out sensor has detected the hopper may have paid out an extra coin.

• Open the main slot machine door. Remove the coin tray by lifting up and pulling out the tray. Simply pull it out and down to remove the tray.
• The hopper is on the bottom floor of the machine and slides out on two base rails along two metal guides. Slide the hopper out slowly by grasping the handle with your left hand and supporting the hopper with your right hand. Do not use the black hopper bowl to pull the hopper out of the slot machine.
• Inspect the hopper to determine if any coins/tokens appear to stuck or jammed in the hopper knife or the hopper coin-out channel.
• If a coin appears to be stuck or jammed, empty the hopper of coins/tokens for easier access to clearing the jammed coin/token.
• Once the stuck or jammed coin has been removed, place the hopper back into the slot machine making sure it slides in easily and completely with the base rails on hopper guides on the bottom of the machine. The hopper plugs into a receptacle toward the back of the machine. It is designed to fit in easily without using excessive force
• Refill the hopper with the proper size coins or tokens. The coin tray can be easily put back into place by ensuring the alignment pins on the coin tray match up to the top alignment holes on the bottom side of the machine. The tray should be pushed down into place. Make sure the tray is even when pushed into place. If the coin tray is not aligned and even, remove the coin tray, and repeat the procedure.
• Close the main slot machine door. The error code should be gone and the machine is ready to play.

Error Code 12 (IGT S+ Machines)

The 3.6 volt battery on the slot machine CPU Board normally lasts for years. However when an Error Code 12 is displayed, this is an indication the battery voltage has dropped below 2.9 volts and is now a low battery.

It is recommended to replace the battery as soon as possible. They can be purchased online from ebay, amazon or realslotmachinesforsale. When ordering a replacement battery, they will provide you with detailed instructions on how to change this battery which is located on the slot machine’s CPU Board.

In order to reset Error Code 12 temporarily, simply open and close the main slot machine door. It is important not to wait for a long time to replace the battery as data stored on the RAM may be lost. Replace the battery Asap.

Following are some of the other error codes that might interest you to solve your problem in repairing the slot machine

Hopper is Full and Coins Go Down a Chute to Bottom of Machine

Slot machines that accept coins were designed this way because when used constantly on the casino floor, hoppers could quickly fill. There is a coin level probe on side of the hopper that looks like a brass screw sticking inward toward the hopper bowl. This probe detects when coins/tokens are at a selected level, and will cause the subsequent coins/tokens played to go down a chute to the bottom of the slot machine.

Provided your slot machine sets on a regular casino slot machine stand with holes in the top and the holes are aligned with the slot machine, those coins which bypassed the hopper will go down the chute, through the hole in the bottom of the machine, through the hole in the top of the stand, and into the open area in the stand cabinet. As casinos have done for years, place a small plastic tub in the slot machine stand cabinet to collect these excess coins.

Retrieving Currency from the Cash Box

Though not all slot machines are equipped to accept currency in order to comply with certain laws but if your slot machine is equipped with a bill acceptor, bill transport and cash box, the bills in the cash box can easily be retrieved.

• Open the slot machine main door. The cash box door is located just under the yellow chute for the bill acceptor. Ensure the cash box door is fully open.
• On the right side of the cash box toward the top is a release level. Push release lever down and pull the cash box straight out toward you. If the cash box seems difficult or impossible to pull out, make sure you have pushed the release lever down.

• Hold the cash box in both hands and turn it upside down. Notice on the bottom of the cash box is a door which has two small finger sized holes on one side. Normally the door is held closed by a small piece of electrical tape so the bottom cash box door doesn’t come open while removing it from the cash box chassis of the slot machine.
• While holding the cash box with the bottom door up toward you, open the door and you will see where the bills are stored. The large spring expands as more and more bills are added to the cash box. Remove the bills by pulling them straight out.
• Close the bottom door of the cash box and re-secure the door using the same small piece of electrical tape. Turn the cash box around to the original position when you removed it from the slot machine.
• Align the flat top of the cash box with the flat surface at the top of the cash box chassis from which you removed it. Slide it firmly into place. Now close the cash box door and the main slot machine door and you are ready to use it for gaming.

All the content, graphics and videos in this post have been gathered by research for you from various online sources and hope this helps you as a guide to repair your slot machines. Note that many guide books and manuals too are there for you to buy from online stores which are handy to know as how to repair your slot machines. Just stay tuned at realslotmachinesforsale and know many more interesting information about slot machines.

Pachislo slots are popular Japanese slot machines (as they originated from Japan) but famous all over the world. Pachislos (pronounced PATCH-ee-slows) look much like any slot machine you would find in a Las Vegas casino. In Japan, Pachislo slot machines take tokens rather than coins, and are only used for a couple of years before they are sold to casinos elsewhere in the world (and sometimes to private owners; you occasionally find these in homes as collectibles).

But they differ from American slots in small but significant ways. Like they operate only on tokens, not currency, they supposedly involve some skill: below each spinning wheel is a button that stops it manually, meaning pachislo players earn their jackpots by hitting the button at the right moment. Also, they are not just slot machines. Many of them, particularly the newer models, have LCD screens on which elaborate video-game-style narratives play out. Let us find out what these machines are, how they operate and how to play Pachislo.

Pachislo machines are one of the most admired Slot machines for collectors

Many Americans like Eddie Cramer, Rita Schack, Brian Evans and many more such slot machine collectors have Pachislo at their home. Not only these machines are awesome having some oddball traits like colorful anime-style graphics, ear-splitting sound effects with Japanese approximations of American themes like “Rambo” “Harley-Davidson” and like an “Obama Inauguration” Pachislo comes decorated with an image of the president, arms folded, in front of the presidential seal and an American flag.

Pachislos are considerably cheaper than American slots: basic machines cost about $250, whereas a decommissioned Las Vegas slot machine can cost from $800 to $2,000.

In Japan, compulsive pachislo players are known to sit glassy eyed for hours in seedy pachinko parlors (named for the vertical pinball game that spawned pachislo).

In the United States, however, the obsession seems to be more about collecting than playing. Collectors speak of sacrificing whole floors of their homes to accommodate their ever-growing collections. They gather on sites like Pachitalk.com and PachisloDB.com to share reviews of the newest machines or trade tips on where to find rare ones. And YouTube is filled with hundreds of hours of pachislo enthusiasts showing off their chirping, flashing collections.

Having Pachislos slot machines depends in which state you live like two states, Connecticut and Washington, have ruled that pachislos fall under existing laws barring home ownership of slot machines, and most dealers won’t ship there. Other states, like California, have deemed them legal as long as they are not converted to accepting cash.

So before you think of having one of these machine it is better to speak with either your local police agency, the district attorney’s office or consult with an attorney. Still, because pachislos are sold and traded almost exclusively online, and because most states don’t seem to put much effort into enforcing laws against them, most collectors have no trouble acquiring pachislos wherever they live.

Getting started with Pachislo machines

All Pachislo machines basically operate the same way and have the same features so you will not find any difficulty in getting started.

• First to power on or turn on the machine you need to plug your machine into a standard outlet.
• Then place your key into door lock, turn to the right to open door.
• Locate and turn on your Power Switch. Most are a toggle switches located on the power supply, which is usually located on the bottom left of the machine.
• After you have tested the Power Switch, turn in off once more to load the hopper with at least 100 tokens. Also get familiar with the hopper by removing it, loading it, and reinserting it. Hoppers are connected with either one bundle of cords coming from the power supply to the hopper that can be unplugged at either end, or by a plug at the base of the hopper that is plugged in when you insert the hopper.
• Now turn Power Supply back on. If the credit display is lit (0), the machine is in the credit mode. All subsequent winnings will be added to the credit meter.
• If the credit display is not lit, the machine is in the automatic payout mode. All subsequent winnings will be automatically dispensed into the coin tray. To change between modes, press the Credit Collect button while the machine is idle. You cannot change modes while the machine is in play or when tokens have already been inserted.

Also some machines like Yamasa and Daido will only operate in CREDIT mode. This is in the programming of the machine and cannot be changed. On some machines like Olympia the Credit or Cancel button must be held down for 5-10 seconds to dispense coins into the coin tray.

The credit and direct Pay Modes

Credit Mode is when your winnings are added up in the Credit window as they are won and only dispensed when you manually dispense them. Direct Play Mode is when all winnings are automatically dispensed into the coin tray as they are won.

To play in Direct Play Mode hold the Collect Button down to discharge any coins held in the Credit Meter. After all coins are in the coin tray, press and hold the same button for a few seconds until the symbols “__” appear on the Credit Meter instead of a zero. The machine is now in direct play mode and will automatically dispense all winnings into the coin tray.

To play in Credit Mode hold the Collect Button down for a few seconds until “0” appears in the Credit Meter window.

Setting the odds and full reset

If your machine is malfunctioning you will need to reset your machine and this is the same procedure used for setting the payout odds.
It is a simple procedure that can also be used to reset your machine for a variety of error codes, the most common being that you have hit a large jackpot and there are not enough coins in the hopper to payout the winning.

Odds levels are adjustable from 1 to 6. The odds levels vary by machine, and different manufacturers set their odds level to different settings from the factory.

To change the odds you will need to access the inside of the machine.

So first turn the power off then turn the key or toggle to the “On” position. Now turn the power back on. When you do you will notice a number from 1 to 6 showing in the Credit Meter or on the inside of the door depending upon the manufacturer. Each number represents a payout level. The higher the number the greater the payout level. The six numbers represent the following odds:

• Level 1 = 55% – 57% payout
• Level 2 = 72% – 74% payout
• Level 3 = 79% – 81% payout
• Level 4 = 88% – 95% payout
• Level 5 = 105% – 107% payout
• Level 6 = 115% – 125% payout

You can also find specific machine odds sometimes posted on the inside of the door by the coin mechanism. Payout levels are the average payout over 10,000 coins. Just like in a casino you will hit winning streaks and losing streaks. The odds may vary by machine. The payout level can be changed, but the payout percent at a given level cannot be altered.

Also use the Reset Button on the Power Supply or on the back of the door to change the odds number from 1 to 6. When you have the odds level you want, press down the Spin Knob and the odds are set. Finally turn the toggle of key back to the “Off” position and you are ready for play.

Standard game operation

Your Pachislo has the capacity of holding up to 50 credits on the Credit Meter. There are a few exception that hold more, but this is the general rule. Instead of moving up to 51+ credits the machine will automatically payout any amount of credits over 50.
For example, if you have 49 credits on the Credit Meter and you hit a winning combination for 2 credits, the Credit Meter will move to 50 and automatically dispense one coin to the Coin Tray.

If you do not fill the hopper with a few hundred coins you will need to reset the machine each time you hit a bonus that gives you a large payout and causes the hopper to run out of coins.

Japanese Slot Machine Hopper Games

How to play Pachislos slot game?

When you are ready just insert at least three tokens into the machine. You will hear them register but will not see them register on the machine as a number. The first three coins will show up on the left or right of the reels as being registered. The first token will light up the center payline, the next token will light up the upper and lower paylines, and the third token will illuminate the diagonal paylines.

Three tokens gives you maximum play, any further tokens you insert will register on the Credit Meter as 1, 2, 3, 4, etc. You may insert up to an additional 50 tokens, the 51st token will be rejected and drop directly to the Coin Tray.

To begin playing some machines require you to push the Maximum Play button then push the black or red Spin Knob down. On others just push Spin Knob. This will start the reels spinning.

On some machines there are two buttons instead of a single Max Bet button. This allows the player to play 1, 2 or 3 credits. Each reel is then stopped independently by pressing one of the three round buttons on the front in any order.

The bonus game and free spins

When you enter a Bonus Game you will know it and you will be given additional guaranteed wins during the next several plays depending on the bonus combination. Most bonus games pay a maximum of 500 coins over the course of the bonus.

Bonus Games take place on the center payline only. When your Bonus Game is over a “Game Over” light may flash or an “oF” error will display on the machine. If this happens the machine must be reset.

On Type B machines once you enter a Bonus Game you must play until the machine enters a Challenge Game. If you enter this game you are forced to finish the game before you can reset the machine. In this case the hopper may run out of tokens, so make sure you have hundreds of tokens in the hopper, or you pause often to remove the tokens from the Coin Tray, open the door, and put them back into the hopper.

Some other unique features

The following three unique features of the Japanese slots make this slot variation appealing for the players.

Japanese Slot Machine Hopper Rental

• The stock is a kind of bonus accumulation. This stock includes bonuses which were collected but not obtained as the player did not manage to hit the bonus symbols during the game.
• The Renchan is a situation when the slots player gets a number of bonuses in a row and takes the probable payouts of about 5000 and even 10000 coins.
• The tenjÅ is the same thing as the ceiling. It is the maximum limit of games which could be played among the releasing of every Stock. Like assume that the tenjÅ is 1600 games and till this moment there were 1590 games played. So, it is for sure that after next 10 games there will be the release of the Stock.

Free spins are common and if you win a free spin you do not have to do anything but press down the Spin Knob to start the reels. It will automatically replay the last number of tokens you had played on the previous spin.

Japanese Slot Machine Hopper Racing

Playing Online Pachislo

Online Pachislo works very much like any other online slot game and online Pachislo is basically just inspired by offline Pachislo. So you don’t need to worry about tokens vs. coins. Just check the pay tables and the requirements for the online Pachislo game you are thinking of playing to see what you need to put in and what you can win. There are even progressive jackpot Pachislo machines online which are linked up to other machines around the world and offer huge payouts. It is also worth pointing out that the “reels” on a Pachislo machine online are not literal reels. While this is obvious, it bears stressing because you have to remember that even if a Pachislo machine online offers you a “stop” button, you are not really stopping real reels. Your results are being generated by a random number generator (RNG), just as with other types of slots at the online casinos.

Japanese Slot Machine Hopper Machine

The above information about Japanese slot machines have been taken from various online sources as well as from Pachislo manual. Pachislo slot machines are much more common than its online counterparts and you buy one for yourself from the online stores like realsloltsmachinesforsale or ebay.